亚洲一区二区福利天堂在线观看-亚洲日韩加勒比无码一区二区三区-正在播放国产在线不卡一区二区-国产午夜一区二区免费视频

?聯系我們
可編程控制器S7-1200
聯系方式
江蘇震旦電氣科技有限公司
地址：江蘇省常州市天寧區龍城大道150號1號樓
總機：0519-86679200 86679300 86679500 86679600 86679700
E-mail：cherry@zhendanele.com

數字量輸出模塊 SIPLUS SM 1222 信號模塊

發布日期：2017-12-26 17:05:46　　瀏覽量：

1.jpg

Overview

●為 CPU 的集成 I/O 提供更多的數字量輸出

●靈活地選擇控制器以滿足相應任務需要

●用于使用附加輸出對系統進行后續擴展

●+60 ℃ 到 +70 ℃，最多可同時控制輸入的 50%

注意：

SIPLUS extreme 產品是基于西門子工業標準產品的。此處列出的內容來自相關的標準產品。添加了特定 SIPLUS extreme 信息

icon_up_arrow.png

Area of application

數字量輸出模塊允許將數字信號從控制器輸出到過程。

這為用戶提供了下列優勢：

●最佳適應性：

使用可以根據需要混合的信號模塊，用戶可以使其控制器準確地滿足相關任務的要求。這可以避免產生不必要的投資?？梢允褂脦в?8 個、16 個和 32 個輸入/輸出通道的模塊。

●靈活性：

如果任務后續有所擴展，可以升級控制器。更新用戶程序非常簡單。

icon_up_arrow.png

Functions

SM 1222 數字量輸出信號模塊將 SIMATIC S7-1200 的內部信號電平轉換為過程所需的外部信號電平。

icon_up_arrow.png

Technical Specifications

Order number6AG1222-1BF32-2XB06AG1222-1BF32-4XB06AG1222-1BH32-2XB06AG1222-1BH32-4XB0

SIPLUS S7-1200 SM 1222 8DQSIPLUS S7-1200 SM 1222 8DQSIPLUS S7-1200 SM 1222 16DQSIPLUS S7-1200 SM 1222 16DQ
Product type designation



Input current



from backplane bus 5 V DC, max.120 mA120 mA140 mA140 mA
Power loss



Power loss, typ.1.5 W1.5 W2.5 W2.5 W
Digital outputs



Number of digital outputs881616

  • ● in groups of

1111
short-circuit protectionNo; to be provided externallyNo; to be provided externallyNo; to be provided externallyNo; to be provided externally
Switching capacity of the outputs



  • ● with resistive load, max.

0.5 A0.5 A0.5 A0.5 A

  • ● on lamp load, max.

5 W5 W5 W5 W
Output voltage



  • ● Rated ＆#118alue (DC)

24 V24 V24 V24 V

  • ● for signal "0", max.

0.1 V; with 10 kOhm load0.1 V; with 10 kOhm load0.1 V; with 10 kOhm load0.1 V; with 10 kOhm load
Output current



  • ● for signal "1" rated ＆#118alue

0.5 A0.5 A0.5 A0.5 A

  • ● for signal "0" residual current, max.

10 μA10 μA10 μA10 μA
Output delay with resistive load



  • ● "0" to "1", max.

50 μs50 μs50 μs50 μs

  • ● "1" to "0", max.

200 μs200 μs200 μs200 μs
Total current of the outputs (per group)



horizontal installation



  • — up to 50 °C, max.

4 A; Current per mass4 A; Current per mass8 A; Current per mass8 A; Current per mass
Relay outputs



Switching capacity of contacts



  • — with inductive load, max.

0.5 A0.5 A0.5 A0.5 A

  • — on lamp load, max.

5 W5 W5 W5 W

  • — with resistive load, max.

0.5 A0.5 A0.5 A0.5 A
Cable length



  • ● shielded, max.

500 m500 m500 m500 m

  • ● unshielded, max.

150 m150 m150 m150 m
Interrupts/diagnostics/status information



Alarms



  • ● Alarms

YesYesYesYes

  • ● Diagnostic alarm

YesYesYesYes
Diagnostic messages



  • ● Diagnostic functions

YesYesYesYes

  • ● Monitoring the supply voltage

YesYesYesYes
Diagnostics indication LED



  • ● for status of the outputs

YesYesYesYes

  • ● for maintenance

YesYesYesYes

  • ● Status indicator digital output (green)

YesYesYesYes
Potential separation digital outputs



  • ● between the channels, in groups of

1111

  • ● between the channels and the backplane bus

500 V AC500 V AC500 V AC500 V AC
Degree and class of protection



Degree of protection acc. to EN 60529



  • ● IP20

YesYesYesYes
Standards, approvals, certificates



CE markYesYesYesYes
Ambient conditions



Free fall



  • ● Fall height, max.

0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package
Ambient temperature during operation



  • ● min.

-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C

  • ● max.

70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position60 °C; = Tmax70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position60 °C; = Tmax
Ambient temperature during storage/transportation



  • ● min.

-40 °C-40 °C-40 °C-40 °C

  • ● max.

70 °C70 °C70 °C70 °C
Extended ambient conditions



  • ● relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity



  • — With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance



  • — against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • — against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method



required front connectorYesYesYesYes
Mechanics/material



Type of housing (front)



  • ● plastic

YesYesYesYes
Dimensions



Width45 mm45 mm45 mm45 mm
Height100 mm100 mm100 mm100 mm
Depth75 mm75 mm75 mm75 mm
Weights



Weight, approx.180 g180 g220 g220 g


Order number6AG1222-1HF32-2XB06AG1222-1HF32-4XB06AG1222-1HH32-2XB06AG1222-1HH32-4XB0

SIPLUS S7-1200 SM 1222 8DQ RLYSIPLUS S7-1200 SM 1222 8DQ RLYSIPLUS S7-1200 SM 1222 16DQ RLYSIPLUS S7-1200 SM 1222 16DQ RLY
Product type designation



Supply voltage



permissible range, lower limit (DC)
20.4 V
20.4 V
permissible range, upper limit (DC)
28.8 V
28.8 V
Input current



from backplane bus 5 V DC, max.120 mA120 mA135 mA135 mA
Power loss



Power loss, typ.4.5 W4.5 W8.5 W8.5 W
Digital inputs



Number of digital inputs
0
0
Digital outputs



Number of digital outputs881616

  • ● in groups of

2211
short-circuit protectionNo; to be provided externallyNo; to be provided externallyNo; to be provided externallyNo; to be provided externally
Switching capacity of the outputs



  • ● with resistive load, max.

2 A2 A2 A2 A

  • ● on lamp load, max.

30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC
Output voltage



  • ● Rated ＆#118alue (DC)

5 V DC to 30 V DC5 V DC to 30 V DC5 V DC to 30 V DC5 V DC to 30 V DC

  • ● Rated ＆#118alue (AC)

5 V AC to 250 V AC5 V AC to 250 V AC5 V AC to 250 V AC5 V AC to 250 V AC
Output current



  • ● for signal "1" permissible range, max.

2 A2 A2 A2 A
Output delay with resistive load



  • ● "0" to "1", max.

10 ms10 ms10 ms10 ms

  • ● "1" to "0", max.

10 ms10 ms10 ms10 ms
Total current of the outputs (per group)



horizontal installation



  • — up to 50 °C, max.

10 A; Current per mass10 A; Current per mass10 A; Current per mass10 A; Current per mass
Relay outputs



  • ● Number of relay outputs

881616

  • ● Rated supply voltage of relay coil L+ (DC)

24 V24 V24 V24 V

  • ● Number of operating cycles, max.

mechanically 10 million, at rated load voltage 100,000mechanically 10 million, at rated load voltage 100,000mechanically 10 million, at rated load voltage 100,000mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts



  • — with inductive load, max.

2 A2 A2 A2 A

  • — on lamp load, max.

30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC

  • — with resistive load, max.

2 A2 A2 A2 A
Cable length



  • ● shielded, max.

500 m500 m500 m500 m

  • ● unshielded, max.

150 m150 m150 m150 m
Interrupts/diagnostics/status information



Alarms



  • ● Alarms

YesYesYesYes

  • ● Diagnostic alarm

YesYesYesYes
Diagnostic messages



  • ● Diagnostic functions

YesYesYesYes

  • ● Monitoring the supply voltage

YesYesYesYes
Diagnostics indication LED



  • ● for status of the outputs

YesYesYesYes

  • ● for maintenance

YesYesYesYes

  • ● Status indicator digital output (green)

YesYesYesYes
Potential separation digital outputs



  • ● between the channels

Relay, dry contactRelay, dry contactRelaysRelay, dry contact

  • ● between the channels, in groups of

2244

  • ● between the channels and the backplane bus

1500 V AC for 1 minute1500 V AC for 1 minute1500 V AC for 1 minute1500 V AC for 1 minute
Permissible potential difference



between different circuits750 V AC for 1 minute750 V AC for 1 minute750 V AC for 1 minute750 V AC for 1 minute
Degree and class of protection



Degree of protection acc. to EN 60529



  • ● IP20

YesYesYesYes
Standards, approvals, certificates



CE markYesYesYesYes
Ambient conditions



Free fall



  • ● Fall height, max.

0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package
Ambient temperature during operation



  • ● min.

-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C

  • ● max.

70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position60 °C; = Tmax70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position60 °C; = Tmax

  • ● permissible temperature change

5°C to 55°C, 3°C / minute


Ambient temperature during storage/transportation



  • ● min.

-40 °C-40 °C-40 °C-40 °C

  • ● max.

70 °C70 °C70 °C70 °C
Extended ambient conditions



  • ● relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

  • ● At cold restart, min.

-25 °C


Relative humidity



  • — With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance



  • — against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • — against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method



required front connectorYesYesYesYes
Mechanics/material



Type of housing (front)



  • ● plastic

YesYesYesYes
Dimensions



Width45 mm45 mm45 mm45 mm
Height100 mm100 mm100 mm100 mm
Depth75 mm75 mm75 mm75 mm
Weights



Weight, approx.190 g190 g260 g260 g


產品和服務

公司信息

    聯系我們

  • 聯系方式
  • 總機：0519-86679200 86679300 86679500 86679600 86679700
  • 傳真：0519-89991206
  • 地址：江蘇省常州市天寧區龍城大道150號1號樓
  • 郵編：213021
  • E-mail：cherry@zhendanele.com
  • 官方微信公眾平臺

Copyright?江蘇震旦電氣科技有限公司 All Rights Reserved. 蘇ICP備06023532號