?聯系我們
SIPLUS LOGO! 模塊化基本型
Overview
節省空間的基本型
擴展模塊連接接口，可尋址24路數字量輸入、16路數字量輸出和8個模擬量輸入和2個模擬量輸出
可選擇連接 LOGO！TD 文本顯示（可連接到所有 LOGO!0BA6 基本型)
LOGO! 的新改進0BA7 型號：
以太網接口，用于與 SIMATIC 控制器、SIMATIC 面板以及 PC 進行通訊
可組網多達 8 個 LOGO! 設備
標準 SD 卡或 SIMATIC 存儲卡的使用
注意：
SIPLUS extreme 產品是基于西門子工業標準產品的。此處列出的內容來自相關的標準產品。添加了特定 SIPLUS extreme 信息
Design
LOGO! 0BA6:
繼電器輸出，最高輸出電流 10A(不適于 LOGO!24).
集成了可參數設計背光的顯示區(4x12字符)。
集成了操作員控制面板。
內置EEPROM存儲器，用于控制程序和設定值
用于防復制和專有技術保護的可選程序模塊。
可選電池模塊和組合電池/程序模塊，2 年后備集成實時時鐘。
內置夏令時/冬令時自動調節的實時時鐘。
8個數字量輸入，4個數字量輸出。
對于DC12/24V型號，4個輸入作為模擬量輸入(0-10V)；也可作為數字量輸入。
4個輸入可用來高速計數，最高5KHz(只針對于直流型)。
擴展模塊連接接口，最多可編址 24 點數字量輸入、16 點數字量輸出、8 點模擬量輸入和 2 點模擬量輸出。
用于連接到 LOGO!TD 文字顯示屏。
每個用戶程序最多 200 個函數塊
LOGO!0BA7:
以太網接口（取代以前系列的串行編程接口）
繼電器輸出，輸出電流最大為 10A
集成了可參數設計背光的顯示區(4x12字符)。
集成了操作員控制面板。
內置EEPROM存儲器，用于控制程序和設定值
標準 SD 卡或 SIMATIC 存儲卡可選
內置夏令時/冬令時自動調節的實時時鐘。
備份集成的實時時鐘 20 天。
8個數字量輸入，4個數字量輸出。
對于DC12/24V型號，4個輸入作為模擬量輸入(0-10V)；也可作為數字量輸入。
4個輸入可用來高速計數，最高5KHz(只針對于直流型)。
擴展模塊連接接口，最多可編址 24 點數字量輸入、16 點數字量輸出、8 點模擬量輸入和 2 點模擬量輸出。
用于連接到 LOGO!TD 文字顯示屏。
LOGO!8:
以太網端口
繼電器輸出，輸出電流最大為 10A
背光可參數化集成顯示區（6 x 16 個字符，3 種背光顏色）。
集成了操作員控制面板。
內置EEPROM存儲器，用于控制程序和設定值
可選的標準微型 CF 卡
內置夏令時/冬令時自動調節的實時時鐘。
備份集成的實時時鐘 20 天。
8個數字量輸入，4個數字量輸出。
對于DC12/24V型號，4個輸入作為模擬量輸入(0-10V)；也可作為數字量輸入。
4個輸入可用來高速計數，最高5KHz(只針對于直流型)。
擴展模塊連接接口，最多可編址 24 點數字量輸入、20 點數字量輸出、8 點模擬量輸入和 8 點模擬量輸出。
連接 LOGO!TDE 通過以太網。
Functions
集成有基本和特殊功能：
基本邏輯功能：
與，或，非，與非，或非，異或，上升沿/下降沿觸發。
特殊功能：
接通延時，鎖存接通延時，斷開延時，脈沖延時，鎖定延時，計數器（加計數/減計數），時間開關，間隔延時繼電器，運行小時數計數器，觸發器，異步脈沖發生器，年時間開關，舒適照明開關功能，隨機發生器，樓梯照明開關功能（符合 DIN 18015-2），邊沿觸發間隔延時繼電器，組合接通/斷開延時，模擬值比較器，模擬觸發器，模擬值變化觸發器，模擬看門狗，模擬放大器，文本和變量顯示，移位寄存器，軟鍵功能，PI 控制器，斜坡功能，模擬復用器，PWM 功能，模擬算術運算功能，模擬算術運算功能錯誤檢測功能。
可鏈接 200/400 個函數塊。
27/64 個位存儲器
（包括重啟位存儲器，用于控制集成顯示屏和 LOGO! 的背光顯示位存儲器TD，用于在消息文本中的 2 個可參數化字符之間切換的位存儲器）。
內置保持。
口令保護。
作為選項可提供的功能
作為選項可提供專有保護技術程序模塊或 CF/微型 CF 卡。
LOGO! 0BA6 集成實時時鐘的后備， 可選用使用壽命 2 年的電池模塊和組合電池/程序模塊
LOGO! 集成實時時鐘的后備 0BA7 和 LOGO!8 個，20 天。
可選用的 LOGO!TD 文本顯示屏與所有 ..0BA6 Pure 型的連接
用于 LOGO! 的其它功能0BA7
數據記錄至內部存儲器或 CF 卡（最多 2000 個記錄）
用于 LOGO! 的宏（用戶自定義功能）Soft Comfort V7
可以連接 400 個功能塊
16 個模擬位存儲器
64 個接線端子
4 個 8 位移位寄存器
新增特殊功能：
天文時鐘，模擬濾波器，平均值計算，最小/最大值，定時器
診斷功能
用于 LOGO! 的其它功能8
數據記錄至內部存儲器或微型 CF 卡（最多 20000 個記錄）
用于 LOGO! 的宏（用戶自定義功能）極為簡單
可以連接 400 個功能塊
64 個模擬位存儲器
64 個接線端子
4 個 8 位移位寄存器
擴展診斷功能
Technical Specifications
Order number | 6AG1052-1CC01-2BA6 | 6AG1052-1MD00-2BA6 | 6AG1052-1HB00-2BA6 | 6AG1052-1FB00-2BA6 | |
|---|---|---|---|---|---|
SIPLUS LOGO! 24C | SIPLUS LOGO! 12/24RC | SIPLUS LOGO! 24RC | SIPLUS LOGO! 230RC | ||
Product type designation |
|
|
|
| |
Installation type/mounting |
|
|
|
| |
Mounting | on 35 mm DIN rail, 4 spacing units wide | on 35 mm DIN rail, 4 spacing units wide | on 35 mm DIN rail, 4 spacing units wide | on 35 mm DIN rail, 4 spacing units wide | |
Supply voltage |
|
|
|
| |
Rated ＆#118alue (DC) | |||||
| Yes | ||||
| Yes | Yes | Yes | ||
| Yes | ||||
| Yes | ||||
permissible range, lower limit (DC) | 20.4 V; 22 V @ >55 °C | 10.8 V; 11 V @ >55 °C | 20.4 V; 22 V @ >55 °C | 100 V | |
permissible range, upper limit (DC) | 28.8 V; 27.5 V @ >55 °C | 28.8 V; 27.5 V @ >55 °C | 28.8 V; 27.5 V @ >55 °C | 253 V | |
Rated ＆#118alue (AC) | |||||
| Yes | ||||
| Yes | ||||
| Yes | ||||
Time of day |
|
|
|
| |
Time switching clocks |
|
|
|
| |
| 190 | 8 | |||
| 80 h | 80 h | 80 h | 80 h | |
Digital inputs |
|
|
|
| |
Number of digital inputs | 8; Of which 4 can be used in analog mode (0 to 10 V) | 8; Of which 4 can be used in analog mode (0 to 10 V) | 8 | 8 | |
Digital outputs |
|
|
|
| |
Number of digital outputs | 4; Transistor | 4; Relays | 4; Relays | 4; Relays | |
short-circuit protection | Yes; electrical (1 A) | No; external fusing necessary | No; external fusing necessary | No; external fusing necessary | |
Output current |
|
|
|
| |
| 0.3 A; 0.2 A @ > 55 °C; 0.3 A @ > 55 °C & < 15 s | ||||
Relay outputs |
|
|
|
| |
Switching capacity of contacts |
|
|
|
| |
| 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s | 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s | 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s | ||
| 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s | 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s | 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s | ||
EMC |
|
|
|
| |
Emission of radio interference acc. to EN 55 011 |
|
|
|
| |
| Yes; Radio interference suppression according to EN55011, Limit ＆#118alue Class B | Yes | Yes | Yes | |
Degree and class of protection |
|
|
|
| |
Degree of protection acc. to EN 60529 | |||||
| Yes | Yes | Yes | Yes | |
Standards, approvals, certificates |
|
|
|
| |
CSA approval | No | No | No | No | |
UL approval | Yes; file＆#58 E120869 // Tmax = 55 °C | Yes; file＆#58 E120869 // Tmax = 55 °C | Yes; file＆#58 E120869 // Tmax = 55 °C | Yes; file＆#58 E120869 // Tmax = 55 °C | |
FM approval | No | No | No | No | |
developed in accordance with IEC 61131 | Yes | Yes | Yes | Yes | |
according to VDE 0631 | Yes | Yes | Yes | Yes | |
Marine approval |
|
|
|
| |
| No | No | No | No | |
Ambient conditions |
|
|
|
| |
Ambient temperature during operation |
|
|
|
| |
| -25 °C; = Tmin | -25 °C; = Tmin | -25 °C; = Tmin | -25 °C; = Tmin | |
| 70 °C; = Tmax; 55 °C @ UL/cUL use | 70 °C; = Tmax; 55 °C @ UL/cUL use | 70 °C; = Tmax; 55 °C @ UL/cUL use | 70 °C; = Tmax; 55 °C @ UL/cUL use | |
Extended ambient conditions |
|
|
|
| |
| Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
Relative humidity |
|
|
|
| |
| 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | |
Resistance |
|
|
|
| |
| Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Dimensions |
|
|
|
| |
Width | 72 mm | 72 mm | 72 mm | 72 mm | |
Height | 90 mm | 90 mm | 90 mm | 90 mm | |
Depth | 55 mm | 55 mm | 55 mm | 55 mm | |
Order number | 6AG1052-1MD00-2BA7 | 6AG1052-1FB00-2BA7 | |
|---|---|---|---|
SIPLUS LOGO!12/24RCE | SIPLUS LOGO! 230RCE | ||
Product type designation |
|
| |
Installation type/mounting |
|
| |
Mounting | on 35mm DIN rail, 6 spacing units wide | on 35mm DIN rail, 6 spacing units wide | |
Supply voltage |
|
| |
Rated ＆#118alue (DC) | |||
| Yes | ||
| Yes | ||
| Yes | ||
| Yes | ||
permissible range, lower limit (DC) | 10.8 V | 100 V | |
permissible range, upper limit (DC) | 28.8 V | 253 V | |
Rated ＆#118alue (AC) | |||
| Yes | ||
| Yes | ||
Time of day |
|
| |
Time switching clocks |
|
| |
| 333 | 333 | |
| 480 h | 480 h | |
Digital inputs |
|
| |
Number of digital inputs | 8; of which 4 can be used in analog mode (0 to 10 V); max. load 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C | 8; half the number of DI @ max. load 1A per relay @ > +60 °C | |
Digital outputs |
|
| |
Number of digital outputs | 4; Relays | 4; Relays | |
short-circuit protection | No; external fusing necessary | No; external fusing necessary | |
Relay outputs |
|
| |
Switching capacity of contacts |
|
| |
| 3 A | 3 A | |
| 10 A; max. last 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C | 10 A; max. load 1A per relay @ half the number of DI @ > +60 °C | |
EMC |
|
| |
Emission of radio interference acc. to EN 55 011 |
|
| |
| Yes; Radio interference suppression according to EN55011, Limit ＆#118alue Class B | Yes; Radio interference suppression according to EN55011, Limit ＆#118alue Class B | |
Degree and class of protection |
|
| |
Degree of protection acc. to EN 60529 | |||
| Yes | Yes | |
Standards, approvals, certificates |
|
| |
CSA approval | Yes | ||
UL approval | Yes | Yes | |
FM approval | Yes | ||
developed in accordance with IEC 61131 | Yes | Yes | |
according to VDE 0631 | Yes | Yes | |
Marine approval |
|
| |
| Yes | ||
Ambient conditions |
|
| |
Ambient temperature during operation |
|
| |
| -25 °C; = Tmin | -25 °C; = Tmin | |
| 70 °C; = Tmax | 70 °C; = Tmax | |
Extended ambient conditions |
|
| |
| Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) | Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) | |
Relative humidity |
|
| |
| 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) | |
Resistance |
|
| |
| Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! | |
| Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! | |
Dimensions |
|
| |
Width | 107 mm | 107 mm | |
Height | 90 mm | 90 mm | |
Depth | 55 mm | 55 mm | |
